burns at cshl.edu
Sun Mar 27 17:10:19 UTC 2011
Sorry, I'm stuck at work at the moment.
When I get free, I might be able to spend the rest of the day on this.
But... If only one camera will be used for video, why rewire both? Consistency?
Oh... Might go to microcenter....
Do you need anything? (let me know)
Talk to you later.
> -----Original Message-----
> From: list-bounces at freeculture.org
> [mailto:list-bounces at freeculture.org] On Behalf Of Joe
> Sent: Sunday, March 27, 2011 11:37 AM
> To: list at freeculture.org
> Subject: Re: [islandlabs] Balloon!
> On Sat, 26 Mar 2011 16:12:50 -0400
> Joe <toolfox at gmail.com> wrote:
> > Bill, I can wire up the second camera to this new spec and
> get it to
> > you this weekend so you can move forward on the camera control
> > software; writing code is now the major blocking task. Once
> we have a
> > working control system, we need to do some accelerated long-term
> > testing (running the system for three to four hours and review the
> > photos and video...and repeating that test in the freezer to
> > stress-test the hardware.
> > If we swap cameras, I can then upgrade the first camera's wiring.
> ...And since I haven't heard anything back, I've gone ahead
> and rewired the camera I have to the new 5-wire spec.
> Bill, we need to swap cameras so I can rewire the one you
> have and you can work on programming control for a video
> camera in addition to the still camera. Each camera has three
> control/feedback wires, so the
> AtTiny45 will be at it's limit of 6 I/O pins.
> Let's get rolling. There are only two weekends left.
> List mailing list
> List at freeculture.org
More information about the List